BFT PHOBOS N BT Installationshandbuch PDF herunterladen (Seite 21)

AUX3 max contact rating: 24v, 3W

(transistor output)

AUXILIARY OUTPUTS

The Thalia board has two auxiliary outputs. The first (20 & 21), is

a 24 volt, courtesy light output that will activate upon activation

of the gate, and will remain on for 90 seconds after the gate has

closed.

The second output labeled AUX 3 (26 & 27), is defaulted as

second channel radio receiver output, but can be re-

programmed to perform any of the following functions under the

LOGIC sub-menu:

█ █ █ █

20 21 26 27

20 & 21 – 24 VOLT COURTESY

LIGHT OUTPUT (25W MAX)

26 & 27 – AUX 3

N.O. CONTACT

RELAY COMMON

RELAY N.C.

POWER 24V +

POWER 24V -

PROGRAMMING: LOGIC > SAFE 2 > 004 (PHOT CL)

AUX3 > 006

Shadow loop detector

EXAMPLE: SHADOW LOOP DETECTOR WIRING

USING AUXILIARY OUTPUT

VALUE FUNCTION

2ND CHANNEL RECEIVER OUTPUT. Output active when transmitter activates the 2nd channel

GATE OPEN LIGHT. Output active when gate is not closed. flashes while closing

COURTESY LIGHT. Output active during and for 90 seconds after operation.

GATE NOT CLOSED. Output active until close limit is reached

START OF CYCLE. Output active for 1 second at the beginning of each cycle

GATE OPEN ALARM. Output active if gate is held open for more than double the timer to close time

GATE RUNNING. Output active while motors are powered

SOLENOID LOCK. Output active for 2 second at the beginning of open cycle

MAGNETIC LOCK. Output active when gate is closed

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Keine Kommentare

BFT PHOBOS N BT Installationshandbuch Seite 21